NOVUS 3
Heavy Scratch Remover

DESCRIPTION:
Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with Novus 2 polish.

Requires use of Novus 2 for final finishing. Not recommended for use on coated plastics

DIRECTIONS:
1. Shake well. Test in an inconspicuous area.
2. Remove surface dust with clean, soft cloth.
3. Using clean, soft cloth, apply Novus 3 with firm back and forth strokes at right angle to visible scratches. Reapply polish as needed.
4. Continue polishing until only the fine scratches remain. Using cloth, remove all of the remaining polish.
5. Apply Novus 2 in circular motion using a clean cloth. Follow direction on the Novus 2 bottle.

Apply Novus 3 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times.

Continue polishing until only fine scratches remain. Using cloth, remove all remaining polish, this is very important!

Using a clean cloth, apply Novus 2 in a circular motion uniformly to entire surface. Polish using light pressure until Novus 2 dries to a light haze.

Using a clean portion of the cloth, buff the surface clean. Follow with Novus 1 for best results.

[ Back To Novus 3 ]